1 17
MadHeaters

Tempest 2 by MadHeaters
$225.00 USD $225.00 USD $225.00 USD
Shipping calculated at checkout.
In stock
Complete your setup

Optional Goodiez

Reload Gen 3 by MadHeaters
Reload Gen 3 by MadHeaters
Tempest Case by MadHeaters
Tempest Case by MadHeaters
Tempest Bowl Screens by MadHeaters
Tempest Bowl Screens by MadHeaters
Tempest Wand Adapter by MadHeaters
Tempest Wand Adapter by MadHeaters
The Wand by ISpire
The Wand by ISpire

Who is The Tempest 2 by MadHeaters for?

Tempest 2 by MadHeaters. The Tempest 2 is a portable torch or induction heater powered vaporizer. This thermal extraction device arrives with zirconia balls loaded int he cap of the unit. The combination of the adjustable airflow and zirconia balls set this thermal extraction device apart from some of the others.

Tempest 2 by MadHeaters
Scroll to section

Product details

About the Tempest 2

Created by MAD Heaters, the Tempest 2 is a non-electronic, torch or induction heater powered micro ball vaporizer, also known as a stem vaporizer. The Tempest 2 uses a thermal core filled with zirconia balls for incredible flavor and convection heavy heating for a full extraction in a single heat-up. Featuring an adjustable bowl that provides users with the option of loading around 0.1g, 0.15g, or 0.2g , an adjustable air port, 10mm, 14mm, and 18mm WPA compatibility, and changeable balls for different heat retention and extraction properties, the Tempest 2 is an incredibly versatile portable vaporizer with a performance that can be customized to suit any vaporizer enthusiast. The Tempest 2 is made from Grade 5 titanium with the exception of the anodized aluminum heat shield, stainless steel induction sleeve, and induction housing. If you prefer, we do, however, have units that are full Ti available for a slightly higher price. The stem is incredibly easy to clean and overall, the Tempest 2 is easy to use, featuring visual and audible heat indicators and compatibility with the iSpure Wand and YLL 3.0 for induction heating.

What’s new with the Tempest 2?

The Tempest 2 head now features an increased bowl size with a new screen that can be set to 3 different positions, has a thicker induction sleeve for an improved torch experience and better heat retention, has enhanced heat distribution for more thorough full-bowl extractions, a twist-to-lock ball screen, easier indicator assembly, and a greed visual indicator pointer on all of the caps.

What’s Included with the Tempest 2?

  • The Tempest 2
  • 3mm Zirconia balls installed in the head
  • Medium (long) cooling unit
  • 4 spare o-rings (Three 6x1 rings, and one 8x1 ring)
  • 2 bowl screens
  • 2 ball screens,
  • Tube for setting the bowl screen
  • Bowl screen tool
  • 2mm screwdriver bit
  • A few extra zirconia balls

How to use the Tempest 2

Before use, disassemble the Tempest 2 and clean the components with isopropyl alcohol. (Note: please wipe the head assembly clean. Do not soak it as this can corrode internal components. Dry thoroughly.)

Reassemble the device and perform a burn off by heating the cap, while empty, until you hear the click. Allow it to cool and repeat 2-3 times to ensure any residues from cleaning or manufacturing have been burnt off.

Adjust the chamber size to your preference. We recommend starting with the small or medium chamber settings for the most even extraction.

Unscrew the cap and load your material without packing too tightly so that air can flow properly through your material. Screw the cap back on gently.

Adjust the airflow to your preference. You can adjust the air ports on the head and the stem to customize your draw resistance.

If using a torch, use a medium single or dual flam torch and hold the tip of the flame a little less than half an inch away from the cap while slowly rotating the device. Watch the visual indicator and listen for the click that indicates that it’s ready to use.

If using an induction heater, place the Tempest 2 into the induction heater set your temperature around 550 degrees Fahrenheit as a baseline (adjust as needed), insert the tip, and allow the heater to run until the heating cycle finishes.

Take a strong steady draw and use the stem’s carb hole to clear the vapor.

Important information about the Tempest 2

Some Wand induction heaters may have an opening too narrow to be compatible with the Tempest 2. Ensure your Wand has an opening of at least 14.0 mm. If necessary, use glass sanding paper to carefully widen it. If there is no wiggle room, do not attempt to use it, as the glass may break during heating.

*** IMPORTANT: When cleaning head assembly, it must be dried completely afterwards before re-assembling. Soaking the head assembly and letting it air dry can corrode the components of the head assembly. These cannot be warrantied or returned if they are corroded.

What's Included with the Tempest 2 by MadHeaters

Tempest 2 by MadHeaters WIB image
  • Tempest 2 (Midnight Blue/Aluminum)
  • 3mm zirconia balls within the Head

FAQ's

Should I use a torch or induction to heat the Tempest 2 vaporizer?
Which heating method is better is a matter of preference. Many prefer to heat the Tempest 2 using a torch because it’s faster, allows for more control over how it’s heated, and it doesn’t require a power source. Many prefer heating the Tempest 2 using induction because it’s more consistent, there’s less of a learning curve, and there’s no need to repurchase butane. If you do choose to use an induction heater, always ensure compatibility. The wand needs an opening of at least 14.0mm. We recommend checking out the iSpire Wand and the YLL 3.90.
What is the difference between the Tempest and Tempest 2 vaporizers?
The Tempest 2 portable ball vaporizer is an upgrade of the original Tempest. This pocket friendly vape features an increased bowl size with a new screen which can be repositioned to adjust the size of the bowl as needed. The thicker induction sleeve offers better heat retention for an overall better performance and the enhanced heat distribution allows for more even extractions. The Tempest 2 also introduced a twist-to-lock ball screen, easier indicator assembly, and a green visual indicator pointer on all of the caps.
Is the Tempest 2 vaporizer beginner friendly?
Yes, the tempest 2 is incredibly approachable with a simple-to-use design. Some users may find that using a torch to heat up the Tempest 2 has a bit of a learning curve when it comes to figuring out the technique, but induction heaters help to take the guess work out if you prefer. It is important to note, for new users, that this pocket-friendly portable ball vaporizer may look small but does provide a powerful desktop vaporizer style performance.
How do I clean the Tempest 2 vaporizer?
Regular cleaning maintenance for the Tempest 2 is easy. You can spray isopropyl alcohol onto the cooling spiral while holding a paper towel under it and wipe off the spirals with a twisting motion. Use a Q-Tip soaked in isopropyl alcohol to clean the inside of the sleeve and the bowl screen from below.
Are there any accessories that I should consider getting for my Tempest 2 vaporizer?
The Tempest 2 includes the vaporizer, 3mm zirconia balls which are pre-stalled in the Head’s thermal matrix, a medium sized cooling unit, spare o-rings, 3 bowl screens, 2 ball screens, a cleaning tool and tube for setting the bowl screen position, a small screw, extra zirconia balls, and a replacement click disc. You will need either a torch and butane or an induction heater to get started. We recommend the iSpire Wand and the YLL 3.90 for induction heating. We also recommend picking up the Reload Gen 3 by MadHeaters, an all-in-one accessory and storage solution which helps simplify the process of reloading.