1 9
Stickybrick Labs

Flip Brick by Sticky Brick Labs
$100.00 USD $100.00 USD $100.00 USD
Shipping calculated at checkout.
In stock
Complete your setup

Optional Goodiez

Tower Bubbler by Crossing Technology
Tower Bubbler by Crossing Technology
Flip Brick O-Rings Replacement Kit by Sticky Brick Labs
Flip Brick O-Rings Replacement Kit by Sticky Brick Labs
Stainless Steel Screen Replacement pack (6) by Sticky Brick Labs
Stainless Steel Screen Replacement pack (6) by Sticky Brick Labs
Wood Cleaning Brush by VGoodiEZ
Wood Cleaning Brush by VGoodiEZ

Who is The Flip Brick by Sticky Brick Labs for?

Flip Brick by Sticky Brick Labs. The Flip Brick is a portable torch powered dry herb vaporizer. The Flip Brick is made to be used with a water piece.

Flip Brick by Sticky Brick Labs
Scroll to section

Product details

The smallest and lowest-priced device has been redesigned based on customer feedback. The Flip Brick is available in Walnut, Cherry, Rock Maple, and Black Limba, and is a direct WPA for all your water or J-hook needs. Designed to sit upright to store or load, the device flips to attach to your glass.

The Flip Brick is made by hand from the same high-quality hardwood, hand-blown glass, and super-powerful rare earth magnets as all of our other devices. Every Flip Brick ships with both 18.8mm and 14.4mm Male glass connectors to fit most glass right out of the box. The Flip Brick also ships with a 6-pack of screens, one stainless and two wooden stir sticks, a butane torch, two Restrictor Discs, and instructions for use.

 

*Glass stand not included

What's Included with the Flip Brick by Sticky Brick Labs

Flip Brick by Sticky Brick Labs WIB image
  • 1x Flip Brick (multiple wood choice)
  • 1x 18.8mm male glass connector
  • 1x 14.4mm glass connector
  • 6x Screens
  • 1x Stainless stir stick
  • 2x Wooden stir sticks
  • 2x Restrictor discs
  • 1x Butane torch
  • 1x Instructions for use

FAQ's

What makes the Sticky Brick Flip Brick unique?
The Sticky Brick Flip Brick Vaporizer sets itself apart from other Sticky Brick vaporizers by being designed specifically for use with water pipes, acting as an on-demand vaporizer and WPA in one design. The “Flip” in the Flip Brick’s name refers to how the vaporizer flips over after loading, to attach directly to 14mm and 18mm female water pipes.
How do I use the Sticky Brick Flip Brick?
Using the Sticky Brick Flip Brick vaporizer is easy. Select a water pipe with a 14mm or 18mm female joint and fill with water. Adjust the Flip Brick intake to expose the heating chamber and load ground material loosely into the chamber. Adjust the intake again to cover the chamber and insert the Flip Brick’s male joint into your water pipe. Adjust your torch’s flame to about an inch long and aim the flame at the heat intake at about a 45 degree angle. Use a long steady draw while heating and increase your draw speed once you see or taste vapor. To increase the heat, take slower draws or move the flame closer. To decrease the heat, move the flame further away or take faster draws. When you’re finished, remove the flame and the material will stop heating.
How do I clean the Flip Brick?
Cleaning the Sticky Brick Flip Brick vaporizer is easy. Brush out the chamber after every session to prevent build up. For a deeper cleaning, disassemble the Flip Brick by removing the glass mouthpiece, intake, and screen. Soak the glass and screen in isopropyl alcohol and rinse thoroughly after soaking. Do not use alcohol on the wood as this will damage it. Instead, use a cotton swab dampened with water to wipe down the wooden parts, but do not let water soak into the wood. Allow all parts to air dry completely before reassembling.
Does the Flip Brick’s torch come with Butane?
Unfortunately due to shipping regulations the torch included with the Sticky Brick Flip Brick vaporizer will not arrive pre-filled. You will need to purchase butane separately.