Wireless One-Hit Wonder Ball Vape (WOHW) by Crossing Technology

About The Wireless One Hit Wonder V2

The Wireless One Hit Wonder is a high-powered wireless ball vaporizer that received its name due to cordless heater and its ability to clear an entire bowl in a single hit. The wireless design of the Wireless One Hit Wonder cuts back on the clutter of a ball vaporizer making it easier to maneuver and safer to use. Choose between a stainless-steel heater for high heat-retention and heavy conduction, or titanium for rapid heating and pure flavor.

Items included with the Wireless One Hit Wonder

• Wireless Heater filled with 280 3mm round rubies in the V2
• Titanium bowl with both 14.4mm and 18.8mm (19mm) glass joints (male)
• Classic PID controller (Plugs in the rear)
• Dock Station with screws, Allen key, coil guard, and onboard tool storage
• 25mm Barrel Heating Coil
• Large Scoop
• Stir Tool
• Wooden Handle Brush
• Power cord
• 2x Mesh screens for Titanium bowl
• 2x Viton o-rings for Titanium bowl

What do I need to use the Wireless One Hit Wonder V2?

The WOHW comes with everything that you need to get started aside from a water piece but we do have a few suggestions for accessories to help you shop.

If you’d like to adjust the bowl size these adjustable reducer screens are a great accessory to grab.

For an all-glass injector bowl that is ideal for microdosing solutions you may want to pick up the adjustable diffuser pass through chamber.

Beautiful and unique wireless handle sets handcrafted by Ed’s TnT are available here.

All of the bowls that are compatible with the WOHW have been listed together here for easy shopping.

The V2 wireless heater also comes with a 22mm adapter ring to allow fitment of the wireless heater to other brands which use a 22mm fitment such as O’Connell Woodworks.

To use the Wireless One Hit Wonder as a wired ball vaporizer, we recommend picking up the Wireless to Wired Conversion Kit. Using the WOHW with a wire means that the coil is locked onto the housing which results in sustained heating from the coil into the housing and rubies. This allows users to run at much lower temperatures due to less heat loss and removes the need to heat soak between sessions.

This desktop vaporizer kit is geared for use with dry herb however it can be used with concentrates if you choose to pick up a banger.

If you’re still looking for ways to upgrade your Wireless One Hit Wonder V2 we also have this blog available discussing our favorite accessories in more detail

How to use the Wireless One Hit Wonder V2

• Installation and set up are quick and easy but to provide a little extra help, we’ve created a video showing you how to get started with your new WOHW.
• We have also created a simple to follow maintenance guide to help keep your Wireless One Hit Wonder working like new.
• Once your WOHW has been set up, perform a burn-off by running it at 800 degrees Fahrenheit for 10 minutes with an empty coil to clear off any remaining factory residues.
• The Matrix Titanium bowl comes installed with a 14mm glass post but a 19mm post is included in this kit. If you need to swap out for the 19mm, simply pull the 14mm post down from the bowl and replace it with the 19mm glass post.
• We recommend setting the PID temperature to 575 degrees Fahrenheit and adjusting the temperature based on your preference.
• Once the temperature is set, place the wireless head onto the dock and let it heat soak for around 5 minutes do that the rubies can absorb the heat.
• Grind your material and loosely pack it into the Matrix bowl. Do not tamp it down or pack too tightly so that the hot air can properly circulate through the material.
• Place your loaded bowl onto the waterpipe or bubbler that you’re using. Lift the hot head from the dock and pace the injector tip over the bowl.
• Take a slow steady draw to pull the hot air from the rubies and through the material.
• Always place the hot heater head back onto the dock immediately after taking your hit to help it recover heat.
• If the vapor is too harsh or has an odd taste, trying lowering the temperature.
• If vapor is too thin, allow the heater head to heat soak in the dock a longer period of time or try drawing more slowly.

Important information about the Wireless One Hit Wonder V2

The PID controller may or may not be compatible with GFCI outlets.

220V coils are available on request and we may also be able to swap the power cord for the standard North American cord. Please leave instructions in order notes. For customers outside of the United States, we may need to drop ship these directly from the manufacturer in China depending on our stock levels and your location.

At this time, we are unfortunately unable to ship the WOHW V2 and other products to any countries within the EU.

Disclaimer: When removing, pull the Chamber Glass Replacement straight downward, not at an angle. You may find it helpful to remove directly after a session while the Titanium Hybrid Matrix Bowl is still warm. If having difficulties, perform an ISO shake until all debris is removed, rinse with warm water until clean, and air dry before use.

Disclaimer: Any device heated by a hot coil has the potential for injury or possible property damage. Before beginning the wireless heater burn off, make certain the screens are securing the rubies. The threading on the wireless heater assembly MUST BE TIGHT. Failure to inspect before could result in potential injury. **

SAFETY NOTICE

Like with any exposed/covered coil system there are risks of burning and fire. Do not leave unattended and pay special care handling equipment. People with long hair should keep it pulled back while using the equipment and care should be taken wearing loose/baggy clothing. Obviously keep away from pets and children. Common sense goes a long way here. If you are clumsy, prone to getting burned or just not confident handling high powered, high temperature equipment, this is NOT for you. Holler at us at sales@vgoodiez.com and we can help figure out something more your speed.