TKO Wireless Ball Vape Bundle Curated by VGoodiEZ

TKO Wireless Ball Vape Clearance Bundle Curated by VGoodiEZ

Get your best Price on an entry level ball vape with our TKO Clearance sale! The 25mm TKO Wireless Ball Vaporizer Is a Heavy Hitting but also Budget Friendly Ball Vape. It has an Injector, and Diffuser side similar to the V1 WOHW. Get Better bang for your buck when you add a glass option in your kit!

What's Included in the TKO Wireless Vaporizer setup curated by VGoodiez?

• TKO Wireless Ball Vape Diffuser - GR2 Titanium Housing Prefilled with about 250x 3mm Ruby Balls, this Wireless Ball Vape Packs a Punch has very similar form to the OG WOHW but doesn't feature hands free fitment with compatible Bowls/Injectors
• Wireless Dock Station by Crossing Technology-Clamp Your Coil and keep your tools organized using this aluminum dock that sits nicely onto the PID Temperature controller. Rubber Bands can be placed to hold the dock on the PID firmly, and then extra length in the cable for the coil can be wrapped around the bottom of the aluminum dock to hold control of the cable and keep the setup clean.
• 25mm Axial Coil by Crossing Technology / 110V / Standard - Heat your 25mm Ball Vapes and Quartz Bangers. Plug Up - Set the desired temp. on the PID. Enjoy!
• Choose Glass TKO Bowl or Hybrid Glassfinity TKO Bowl -Load the Herb, Drop the bowl in your favorite piece of glass for flower. Then Hold the Heated TKO Ball Vape Diffuser on the bowl to achieve and airtight seal then pull! Glassfinity bowl is Injector and diffuser compatible. Glass TKO Bowl is only injector compatible.
• Herb Scoop -Makes it easy to fill your bowl with little mess!
• Scrape and Stir Tool -Stir your bowl when needed, scrape our residue.
• Wood Brush -Keep your bowl and screen clean. Airflow is important for convection vaporization, blockages will cause inefficiency, hotspots, and in extreme cases combustion.
• Crossing Tech Classic PID - A super simple to use PID controller for your ball vape!
• Optional Glass - Pick up a new piece with your new ball vape for huge discount! Choose between Tower, Orb,Cell and Cell Mega options!

How The TKO Works

This is Convection Style Vaporizer Takes heat from the coil into the housing that's filled with 3mm ruby balls. The heat soaks in the ruby balls, when air is pulled through the diffuser the air gets superheated from the heat soaked rubies, at the right temperature that hot air passes through the herb in the bowl instantly vaporizing just the good stuff, eliminating the smoke factor. No sticky smoke smell on your clothes and room, Vapor does smell, but dissipates shortly after and tends not to stick around.

How to set up the TKO

Step 1. Plug in the heating coil into the round plug at the rear of  the unit. Plug in the power cord into the rear of the unit. *Make sure both the power cord and the heating coil are securely connected.*

Step 2. Wrap the heating coil cord carefully around the cable management lugs of the docking station. Place the other end of the heating coil into the top slot of the dock station and fix it with the two screws provided, using the Allen key. Tighten so the heating coil is snug and secure.

Please note that while this is a wireless housing setup, the controller still needs to be plugged into the mains!

Setting the Temperature for the TKO

To set the temperature ONLY use the up and down arrows, you do not need to press the set button to do this. *The suggested vape temperature range for vaporization is 510-560 Fahrenheit.*

Burn off the manufacturing oil: DO ONCE BEFORE FIRST USE ONLY!

Before the first use, put the wireless housing into the heating coil and heat to 600f for 15-20 minutes. This is to burn off any residue from manufacturing. You are only required to do this once. After this is done reduce the temperature to within the vaping range and allow it a few minutes to settle.

How to Use The TKO

For a convection (hot air) hit, load desired flower to the bowl using the provided scoop. Use the base of the spoon to pack it down gently for even heat distribution. Around one slightly heaped scoop is the maximum amount we suggest using.

*Don't pack too tightly or you will restrict airflow.*

Once the wireless housing is placed in the heating coil, allow time for the wireless housing to heat soak, this can take around 5-10 minutes depending on your preference.

When  you’re ready remove the bowl holding it by the wooden handle,  place it onto your bubbler and load the herb in. Then place the  heater housing on the bowl, diffuser side down and inhale! This will  result in faster vapor production and slightly heavier effects from  your herb.

After the Housing has Heat Soaked

Once ready, place the wireless housing inside your bowl and begin your inhale. You can clear the  entire bowl with a single pull, or do it in 2-3 based on your draw  and temp. The housing can retain heat during a shorter session,  even with short pauses between hits, the warmth stays steady, no  re-heating needed. This is especially true if you have also heat  soaked the bowl as above.  

Repeat as desired. When the session finished, empty the bowl and  use the wood brush to clean the screen. Please note that the  longer your session is, the longer you will need to re-heat the  housing in the coil after use. With this in mind if you plan to load  another bowl straight after, you may want to place the housing  back into the coil after each inhale to ensure that it remains at a  higher temperature and is ready to go again straight after your first  bowl!

Note ONLY FOR GLASSFINITY USERS : The glass joints on these bowls can be quite stiff to remove.  We've found the best way is to grip the glass joint and bowl firmly then pull steadily apart, don't wiggle or twist. Once it's apart you  can add a little o-ring lubricant to the o-rings to make it easier the  next time. If you're really having trouble, you can use thermal expansion to assist; place your wireless housing onto the bowl for  around 15 seconds to heat it up, then hold the titanium part with an  oven glove or towel and pull the glass joint out as described here.

Bowl Compatibility:

The Injector side, works with the Glass TKO Bowl, and the Glassfinity  Bowl. The Head also features as 22mm diffuser end as well that works with the Glassfinity Bowl and other standard 22mm bowls but doesn't feature hands free use. You'll need to hold the Injector or Diffuser side heads onto the Bowl to ensure safety and stability.

SAFETY NOTICE

Like with any exposed/covered coil system there are risks of burning and fire.  Do not leave unattended and pay special care handling equipment.  People with long hair should keep it pulled back while using the equipment and care should be taken wearing loose/baggy clothing.  Obviously keep away from pets and children.  Common sense goes a long way here.  If you are clumsy, prone to getting burned or just not confident handling high powered, high temperature equipment, this is NOT for you.  Holler at us at sales@vgoodiez.com and we can help figure out something more your speed. 

• Do not touch the heater coil unless it has fully cooled
• Do not touch the metal of the housing, only the wooden handle 
• Do not touch the metal of the bowl until it has cooled, especially if  it has been heat soaked 
• Do not leave mains powered setups unattended and keep them  away from pets and children 
• Keep away from water and high humidity

Crossing Tech and its retailers are not responsible for the use or misuse of this product. The TKO is intended for use with legal materials only. If any parts are damaged please cease use and contact your retailer.