Solo 3 V2 by Arizer

The Arizer Solo 3 V2 is an updated version of the original Solo 3 V1 with features to improve user experience. The Arizer Solo 3 V2 has an updated USB-C charging port for faster charging, and the Power-On Lock which originally required a mandatory multi-button sequence to unlock the vaporizer, can now be disabled in the settings. The Solo 3 V1 included 5 on-demand presets but the Solo 3 V2 now features 3 customizable pre-sets for more versatility and user control. The Arizer Solo 3 V2 also features a more streamlined and intuitive operating system which is more user-friendly, and the color display has lighter background which makes it easier to see. Both the Arizer Solo 3 V2 and V1 vaporizers have the same high-quality glass vapor path and hybrid heater.

Cleaning your Arizer Solo 3 V2 vaporizer is easy. Glass stems and metal screens can be soaked in a container filled with isopropyl alcohol for up to 30 minutes. After soaking, scrub gently with a pipe cleaner or small nylon brush dipped in alcohol to remove stubborn residue. Rine thoroughly with warm water and allow these parts to air dry completely before reassembling. To maintain the heating chamber, use a dry cleaning brush to sweep out loose debris, wipe sticky residue with an isopropyl dampened Q-Tip while holding the vaporizer upside down to ensure no liquid drips into the internals. Perform a quick burn-off after cleaning with alcohol to evaporate any leftover residue or odors. For regular maintenance, brush out the stem and oven after every use, avoid overpacking the stem, replace stain steel filter screens regularly. Do not soak the main body of the vaporizer in any liquid at any time, as this will damage the electronics.

Yes, the Arizer Solo 3 V2 vaporizer is easy to use. Grind material to a medium consistency and gently scoop it into the bottom of the glass aroma tube and lightly tamp it. Insert the filled stem into the heating chamber and power on by holding the center M button for 3 seconds. Use the Left, Up, Right buttons to unlock the device, or skip this step if you have disabled the autolock in the settings. Select your mode using the up and down buttons. Session mode is for continuous heating and On-Demand mode is for taking quick, controlled draws. Press the M button to confirm. In session mode the Solo 3 will begin to heat automatically. You the up and down arrows to adjust the temperature. In On-Demand mode, use the left and right buttons to cycle through the preset temperature levels and press the up button to start the heater. You are now ready to enjoy your Solo 3 vaporizer. When you’re finished, press the M button until you see “bye” on the screen.

The Arizer Solo 3 V2 vaporizer is designed specifically for use with dry herb materials and not concentrates, and does not include accessories for concentrate use.