B0 (B Zero) Injector Heavy Bundle Curated by VGoodiEZ
Glass Bowl Pictures need to be updated!
The B-Zero is the latest iteration of the "B" series of heads. This time, it is a single piece "ball" device inspired by the different DIY devices appearing in the community, namely the DIY device put together by "secreagent" which involved the CH 18mm posts and a 16mm coil.
CH removed the machined screen (extra mass) and replaced with a second 5/8 double weave screen located directly below the coil. They also increased the mass to fit one of our 20mm flowerpot coils.
100ish x 3mm Rubies fills the heater complete with just enough room to get the screen in. If you'd like 4mm instead simply leave a comment in the comments and we will send you an invoice for $10 which is the difference in cost between 3mm and 4mm.
* The B Zero is to be used with a 20mm coil made by Cannabis Hardware in this case. We burn off and test coils prior to shipment so there are no returns. It is an XLR connection and is interchangable with the PID equipment we sell but may not work with other equipment. Even if it plugs in correctly, the wiring underneath needs to match. You can cause damage to the coil and PID if not.
- B Zero Head (3430) w/ installed 3mm ruby. 4mm available upon request.
- Stainless Steel Spring Clip (9429)
- Disorderly Conduction Micro- Made in the USA, the value workhorse. 3D printed enclosure takes up minimal space and is lightweight for travel. No frills basic design including hard on/off switch that works with smart plugs. Offers the widest temperature range as the coils and controllers are both manufactured by DC and the electronics are minimal. All controllers are offered in black color but other colors may be available for special order upon request. Just email email@example.com. Start this controller at 600 for the VRod and 550 for the Weedeater. Adjust from there.
- Auber RDK300- Made in China, designed and sourced out of Georgia, USA. Nice metal enclosure with knob for temperature adjustments and auto shutoff feather. Has soft power switch so not workable with smart plugs. One of the most popular PID controllers out there, you can also dive into menu and make further adjustments but please contact Auber directly for support. We can provide some manual links but not much else.
- Crossing Technology- Basic stainless steel stand that hold the coil and heater in place to provide a stable holder. The stand is wide and has rubber feet to help prevent sliding.
- Cannabis Hardware Heat Post with Base- The stand made for this kit. Most safe and most elegant.
Coil Handle Option:
- None- You don't need a handle. It's a luxury. You can safely and comfortably touch the coil at the clamp or above without any fear of getting burned.
- Cannabis Hardware Aluminum Handle- Nice grip. Industrial look. Please note that the handle NO LONGER includes the hempwick wrap (although you can purchase some and wrap yourself). Handle is now BARE aluminum with a design. Pictures need to be updated to include this handle.
- Ed's TnT Cocobolo Wood Handle- Slips over he cord and clamp. Beautiful to look at and feels great in hand with the natural smoothness of Ed's woodwork.
Injector Chamber Option:
- VGoodiEZ Injector Chamber- Choose 14mm or 19mm Male. This injector has quickly become one of our best sellers based on it's performance and value! It has a built in steel screen. It has a nice handle to grab for clearing without having to handle a hot bowl. You can drop the injector in and the bowl will hold it. Glass Bowl Pictures need to be updated!
- Ispire Straight Banger- 14mm Male. This is really a hack where we install a 20.8mm domed screen in a regular banger. The only real advantage it would have over the same priced VGoodiEZ injector is it may be better for smaller loads. It's the only reason this option is here at this point. It used to be that price was the advantage but the VGoodiEZ injector is now the same price. You can drop the injector in and the bowl will hold it but I'd be careful with this as the glass in this is pretty thin and can break if you are not careful.
- Elev8R from Elev8 Glass- Steel Screen Option- 14mm Male. Bowl has a frosted joint which is different from the rest. Screens can be changed and replaced. They do let through a good bit of particulate so you can double them up and or use an ash catcher or adapter to filter out the scoobies. You can drop the injector in and the bowl will hold it.
- Injector Chamber by Sticky Brick Labs- 14mm Male. This is a favorite among many and for good reason! It has a Walnut top and glass joint bottom. The screen deck and bowl circumference help channel the head nicely in this wood chamber. This bowl is not easy to clean (no ISO) and if you combust, you'll likely never fully get rid of the taste. Be careful! The injector sits on top of the chamber with this one and doesn't lock in. You'll need to hold it over the top while you use it and remove it to clear the piece.
- Injector Chamber by Ed's TnT- 14mm Male. This is another beautifully crafted piece of functional art by Ed. His signature cocobolo designed to provide just a little different experience while you gawk at the cocobolo color and grain! This bowl is not easy to clean (no ISO) and if you combust, you'll likely never fully get rid of the taste. Be careful! The injector sits on top of the chamber with this one and doesn't lock in. You'll need to hold it over the top while you use it and remove it to clear the piece.
- Shovelhead with Ed's TnT Cocobolo Handle- Choose either 14mm Male or 19mm Male post. Other available upon request to firstname.lastname@example.org. Made of Grade 2 Ti this is the most durable option. It works with the injector as the injector drops and seals on the inside edge. The Ti heats up quickly and provides a bit of an extra punch! The cocobolo Ed's handles just top it off with the rest!
** Cocobolo is a wood with a lot of color and grain variation. The item you receive may look significantly different than the picture but it will be of the highest quality and just how nature intended it. If you have a specific color or pattern you are looking for you can make a request in the order notes but we can't promise anything.
Also includes bonus:
220V Coils and Worldwide Power Cords Available. Please specify needs in the comments.
All kits are burned off and set up prior to shipping unless otherwise requested. It comes plug and play!
Like with any exposed/covered coil system there are risks of burning and fire. Do not leave unattended and pay special care handling equipment. People with long hair should keep it pulled back while using the equipment and care should be taken wearing loose/baggy clothing. Obviously keep away from pets and children. Common sense goes a long way here. If you are clumsy, prone to getting burned or just not confident handling high powered, high temperature equipment, this is NOT for you. Holler at us at email@example.com and we can help figure out something more your speed.
Safety Precautions and Setup Video
B0 (B Zero) Injector Heavy Bundle Curated by VGoodiEZ
first Ball vape and now im hooked...great service as always
Literally made me bust
first off, VGoodiEZ has by far the best customer service I have ever seen. After a great conversation with the amazing people there I bought the B-0. I can’t believe I have been wasting my bud for this long, I was immediately slapped onto my couch on the first hit. every hit since then has only gotten better.
B-0: amazing, budget-friendly, heavy hitting, and very simple to understand.
VGoodiEZ: amazing company, they deserve way more recognition then they are currently getting.
THANK YOU AND GOODBYE COMBUSTION
Thanks so much for the kind words and CONGRATS for kicking combustion! Please keep it up!
It’s true the B0 rips! Infinitely tweakable hit quality. Worth every penny 🤙