Puffco Peak Pro Link

Technical Specifications

Operation & Chamber Guide

1. How the Peak Pro Link Works

The Link acts as an electronic banger, bypassing the Peak Pro's glass attachment and rerouting vapor into a separate water pipe.

• The Interface: You remove the chamber from your Peak Pro base and screw the "Link Cable" into that same spot.
• The Banger: The other end of the cable holds your 3D or 3DXL chamber. You insert this end into your favorite bong or rig using the provided 10mm or 14mm silicone sleeves.
• Precision Control: Even though you are inhaling through a separate glass piece, the Peak Pro base still handles the Real-Time Temperature Control. You get the exact degree-for-degree heating you’ve programmed in your app.

2. Chamber Compatibility: Do you need the 3DXL?

While the Link works with the standard 3D Chamber, it is widely considered a "3DXL-first" accessory.

• Standard 3D Chamber: Works perfectly for flavor-chasing and smaller dabs.
• 3DXL Chamber (Highly Recommended): The Link is designed to provide a "big rig" experience. Because traditional glass rigs often have much higher airflow than the Peak Pro glass, the 3DXL’s deeper bowl and "XL Mode" vapor production are necessary to prevent the oil from splashing out under heavy suction.

The Link is for the "Connoisseur-Collector" who wants the benefits of an E-Rig without abandoning their expensive glass art.

• Consistent Heat: Unlike a quartz banger that loses heat as you inhale, the Link maintains a steady temperature throughout the entire session.
• Safe for High-End Glass: Eliminates the risk of stress cracks or "chazzing" your expensive glass joints with a butane torch.
• Social Use: The 30-inch cable makes it easier to pass a rig around a table while the Peak Pro base stays safely in the center.

Rig Integration: Human Grade 8" Recycler

The Human Grade 8" Recycler is an excellent candidate for the Peak Pro Link. Because recyclers rely on high-volume water movement and constant suction to function correctly, your setup requires a specific configuration to avoid "flooding" the chamber.

• Joint Size: Your Human Grade 8" Recycler has a 14mm Female joint.
• The Solution: Use the 14mm Silicone Adapter Sleeve included in the Peak Pro Link box. Slide it onto the Link’s banger elbow before inserting it into the recycler.
• Geometry: Your recycler has a 90° joint angle, which is the ideal orientation for the Link. This ensures the 3D/3DXL chamber sits perfectly vertical, preventing your concentrate from leaking into the airpath.

For an 8-inch recycler, the 3DXL Chamber is strongly recommended over the standard 3D.

• The "Splash" Factor: Recyclers require a "long, steady pull" to get the water draining through the uptake tubes. In a standard 3D chamber, this high airflow can cause oil to splash out of the bucket.
• The 3DXL Advantage: The 3DXL is much deeper and features "XL Mode" in the app. This allows you to take those long, heavy recycler hits without losing material or getting oil into the Link’s housing.

Pro-Tips for Your Specific Setup

• Water Level: Recyclers are sensitive. Fill your Human Grade piece until the water just begins to "drain" through the back-flow tube when you pull. Check this before connecting the Link to ensure no water splashes back into the electronics.
• Cable Management: Use the included Cable Clip to secure the cord to the neck of your recycler. This prevents the weight of the cable from tipping your rig over or pulling the banger out of the joint.
• The Oil Catch: Your recycler has a built-in oil catch. This is a huge advantage when using the Link, as it provides an extra layer of protection for your glass, keeping the "reclaim" away from the recycler's intricate internal tubes.
• Check Your Seal: The #1 user error is a loose 14mm adapter. Make sure the silicone sleeve is pushed all the way up the Link's elbow before you seat it in your glass, or you will lose vacuum pressure and the recycler won't "cycle" properly!

What’s in the Box?

• 1x Peak Pro Link Cable (30")
• 1x Base Stand (Weighted to hold banger upright)
• 1x 10mm Silicone Adapter
• 1x 14mm Silicone Adapter
• 2x Replacement O-Rings
• 1x Reusable Cable Clip

Note: If your Link flashes Red/White, update your Peak Pro to Firmware 'AW' via the Puffco Connect App.